******************

   3D Scanning Open House

Thursday, August 5th

9:00am – 5:00pm

at JMR Systems Offices,

Derry, NH

Watch the CGI  Pearl-700 Cross-Sectional 3D Scanning

Test Drive the Konica Minolta RANGE7

& the Roland LPX-60 3D Laser Scanners

Try your hand at GibbsCAM & RapidForm XOR & XOV

Come anytime between 9:00 & 5:00

At 42 East Derry Road in Derry, NH 03038

Refreshments and Door Prizes

Introducing CGI's

(Capture Geometry Internally)

Cross-Sectional Scanning (CSS)

The CSS Systems include the CSS 300, the CSS 1000, the CSS 3000 and the Pearl 700. The CSS Systems and the Pearl 700 offer superior digitizing capability and performance over laser digitizers, touch-probes, X-ray and in-house CAD reproductions for parts with complex internal features

You can:

• 3D Inspection – for small molded parts
• Capture Complex Internal and External Geometry
• Measure Internal Features
• Reverse Engineering
• Failure Analysis
• Tooling Qualification
• Create an ultra-dense point cloud
• Pliable Parts Inspection

See how you can benefit from 3D Scanning

To register or for more information on this FREE event, contact:

Jane Greene, JMR Systems

Toll Free 888-228-6430

or email jane@jmrsys.com

Also ready for Inspection at the Open House

When your Productivity Counts! Webinars

Each Webinar Focus' on Technical Topics in GibbsCAM

The Next Webinar will focus on Connectors

You must register to attend each Webinar

JMR Systems' GibbsCAM Customers

with Current Maintenance may attend for free

Call for Details Toll Free 888-228-6430

**********

RapidForm XOR Redesign

Seminars

Every Friday

New Rapidform XORedesign (XOR) Creates Fully Parametric Solids

& Freeform Surfaces from 3D Scan Data.

•  XOR web demos are held every Friday at 2:00pm Eastern

Space is limited, Call toll free 888-228-6430.

Call for details and instructions on how to participate

*************

Join us at our workshops and training events.

Each workshop focuses on the attendee's interests. Workshops

are held at our facility. Please call for seating availability and directions.

Hands-on Workshops
DATE: Held on the first Thursday of every month
TIME: 9AM - Noon
COST: Free

Learn more about:

 Reverse Engineering

•  Subtractive Rapid Prototyping
•  GibbsCAM
•  3D Scanning both Piezo & Laser
•  Try the newest RapidForm

Spend an afternoon with an Expert
DATE: Held on the first Thursday of every month
TIME: 1- 4:30PM
COST: $400 per person

 GibbsCAM Training

•  Program your part help
•  Learn 3D Scanning Basics both Piezo & Laser
•  Work with 3D point cloud data
•  Prepare scan data for CAD/CAM
•  Learn Milling Basics on Roland's MDX-20, MDX-40 & MDX-540
•  Using RapidForm XOV Verify for Inspection

Put us to work for you; call or email us now. Toll Free 1.888.228.6430

- With JMR Systems Service,Training & Support!